Auto Catching Setup Guide

Setup Instructions Guide

Installation Instructions

In app set up

Link to TTC Set Up Guide <-- Click To Watch Video

Press the center button of your Plus + so its flashing, this will make it possible for your

PoGo app to detect it and show up as “Available Devices”

After connecting it, change the setting to the following

On Physical Device

Green means on red means off.

After turn the switch on the Plus + to the “on” position and you are good to go!

If not connected/using the Plus + I recommend turning the mod switch off to save battery

Connections Issues

If having issues connecting or detecting Plus + make sure the toggle is in the OFF position (Red Side). Sometimes if you have not used the Plus + for a long time and have left the toggle in the ON position the plus + tends to get itself in a glitch/loop. By turning the toggle off you should be able to get it out of that loop. After it connects to the app you can turn back the mod again.

Using Pokemon Sleep

Toggle switch to the off position and hold the center button till the light turns blue (should be less than a second). To wake up plus + hold center button again. I believe the Plus + needs to at least track 4 hours of sleep else you wont get any results.

Soft Reset

If having connection issues or anything of the sort turn the toggle switch to the off position and press the reset button on the back of the Plus + close out of the Pokemon Go app and try connecting again this should fix most issues.